Mettler Toledo M300 FLOW Spécifications télécharger pdf (Page 31)

Transmitter O

M300 31

M300

Printed in Switzerland 52 121 305

8.3.1 Channel setup

Press the [ENTER] key to select this Menu.

The 4 lines of the display can now be conﬁgured with a value. Pressing the [ENTER] key will

display the selection for lines c and d.

Pressing the [ENTER] key again will bring up the Save Changes dialog.

8.3.2 Temperature source

Press the [ENTER] key to select this Menu. The following option can be chosen: Fixed or Use

this channel

Fixed: allows a speciﬁc temperature value to be entered.

Use this channel: temperature input will be taken from the sensor attached.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 63 64

Operation Manual 1
Transmitter O 1
M300 2 2
M300 4 4
M300 5 5
M300 6 6
1 Introduction 7
2 Safety instructions 7
M300 8 8
3 Unit overview 9
3.2 Overview 1/2DIN 10
3.3 Control/Navigation Keys 11
3.3.1 Menu Structure 11
3.3.2 Navigation keys 11
M300 12 12
3.4 Display 13
3.3.6 “Save changes” dialog 13
3.3.7 Security Passwords 13
4 Installation instruction 14
M300 15 15
M300 16 16
M300 17 17
M300 18 18
2 Terminal for sensor 19
4.3 Connector PIN deﬁnition 20
4.4 Connection of sensor 21
4.4.2 Typical wiring 22
M300 23 23
6 Quick setup 24
6.3 Set points 25
7 Calibration 26
7.3.2 Process calibration 27
7.4 Temperature calibration 28
7.5 Edit 29
7.6 Verify 29
8 Conﬁgure 30
8.3.1 Channel setup 31
8.3.2 Temperature source 31
8.3.3 O 32
8.3.4 Set averaging 32
8.4 Analog outputs 33
8.5 Set points 34
8.6 Alarm/Clean 35
8.6.1 Alarm 35
8.6.2 Clean 36
8.7 Display 36
8.7.1 Measurement 36
8.7.2 Resolution 37
8.7.3 Backlight 37
8.7.4 Name 37
8.8 Hold outputs 38
9 System 39
9.3 Passwords 40
9.3.1 Changing passwords 40
9.4 Set/clear lockout 41
9.5 Reset 41
9.5.1 Reset system 41
M300 42 42
10 PID setup 43
10.1 Enter PID Setup 44
10.2 PID A/M 44
10.3 Mode 45
10.3.1 Tune Parameters 46
10.3.4 Proportional Limits 46
10.3.5 Corner Points 46
10.4 PID Display Setup 47
11 Service 48
11.1.2 Digital Input 49
11.1.3 Display 49
11.1.4 Keypad 49
11.1.5 Memory 50
11.1.6 Set relay 50
11.1.7 Read relays 50
11.1.8 Set analog outputs 51
11.1.9 Read analog outputs 51
11.2 Calibrate 51
11.2.1 Calibrate meter 51
11.2.1.1 Current 52
11.2.1.2 Temperature 52
11.2.2 Calibrate analog 53
11.2.3 Calibrate unlock 53
11.3 Tech service 53
12 Info 54
12.3 Model/software revision 55
13 Maintenance 56
14 Trouble shooting 56
14.1 Warning- and alarmlist 57
14.2 Changing the fuse 57
16 Speciﬁcations 58
M300 59 59
17 Default tables 60
18 Waranty 61
19 UL Statement (Pending) 61
M300 62 62
M300 63 63
Addresses 64

Commentaires sur ces manuels

Pas de commentaire

Mettler Toledo M300 FLOW Spécifications Page 31

Commentaires sur ces manuels